NEW MINERAL FLOORING

WE ARE THE EXCLUSIVE DISTRIBUTOR FOR VENETO OF THE SIB ITALIA BRAND EXCLUSIVE BRAND OF CONCRETE SOLUTION ITALIA

FELTRACCO FRATELLI, 

A RENOWED COMPANY KNOWN IN THE CONSTRUCTION AND CONSERVATIVE RESTORATION OF TERRAZZO AND PASTELLONE MADE WITH COTTO AND VENETIAN LIME, 

IS PLEASED TO PRESENT THE 

NEW LINE OF FLOORS
WHICH REPRESENTS AN IMPORTANT AND FASCINATING ALTERNATIVE FLOOR
COMPARED TO OUR EXCLUSIVE LINE OF PRECIOUS FLOORING.

A low-thickness Venetian Seminato floor that adapts very well to all types of environments and offers infinite design possibilities, without compromising quality. 
It is possible to create joint-free floors in very large areas and to work with the entire range of colors in the cement binder mixture by playing with the dimensions, quantities, and colors of the aggregates. 
Logos and elements of various kinds can be inserted into the floor: all these options can be combined with each other. It combines the solidity of concrete and the purity of the floor finishes:

A NATURAL AND AUTHENTIC FLOOR 
100% MINERAL - 100% ECOLOGICAL

This type of Seminato floor guarantees ease of maintenance thanks to its total water repellency. Over time it requires only a light sanding to bring it back to its initial shine. 
It is an outstanding alternative to traditional finishes, with exceptional wear and impact resistance. Its characteristics allow access to a technically incomparable solution and at the same time free the creative talent of each person.

PRODUCT OF EXCELLENCE THANKS TO THE COMBINATION OF SIX UNIQUE FEATURES:

  1. No shrinkage or contraction. 
  2. Adhesion > 2 N/sqm. 
  3. High compressive strength: 2 days > 60 N/sqm; 7 days > 80 N/sqm.; 28 days > 100 N/sqm 
  4. High flexural strength 2 days > 12 N/sqm; 7 days > 16 N/sqm.; 28 days > 20 N/sqm 
  5. Great abrasion resistance: Böhme values from A5 to A1.5 
  6. Hardness up to 9/10 on a MOHS scale.

Uno dei più grandi vantaggi di questo prodotto è la sua capacità di garantire queste incredibili caratteristiche tecniche con soli 10 mm di applicazione.

It differs in being a modern Venetian seminato floor compared to traditional systems and main competitors:

  1. Very short construction times (smoothing and final treatment can be carried out 24 hours after installation);
  2. No cracks in the pavement;
  3. Very reduced thicknesses (8mm);
  4. Infinite chromatic combinations and therefore total customisation, all types of marble, precious stones, glass and crystals can be used. 

SPECIFICATION ITEM FOR THE CREATION OF A LOW-THICKNESS SEMINATO VENEZIANA EFFECT CEMENTITIOUS COATING. 

  1. Preparation of the laying surfaces by abrasion in order to eliminate any part that is inconsistent with the substrate or any polluting substances such as oils, greases, etc. 
  2. Possible grouting of movement joints or cracks by welding with iron bars drowned in epoxy resin. 
  3. Accurate cleaning by suction. 
  4. Application of solvent-free two-component epoxy coating by roller or spatula until the surface is completely covered in a uniform manner; on the fresh floor, dusting of spherical quartz of 1.2/1.5 granulometry up to refusal. 
  5. Once dry, remove the excess quartz by suction • Application of the product using a specific tool called “staggia” and special rulers in order to adjust the thickness (about 12 mm), then a needle roller will be passed to eliminate the air trapped in the mortar in order to level it. The floor is characterized by a high compressive strength of 100 N/mmq and by an excellent flexural strength of 20 Mpa. 
  6. After about 24/48 hours it is necessary to start the smoothing process with metallic diamond tools; once completely dry, the sanding process will be completed and it will be performed with a  complet dry technique.
  7. During the sanding process, if small holes or porosity appear, they must be sealed with stucco (putty) that will be applied with an American or rubber trowel. Once dry, if there are still small pores, repeat the grouting cycle even only in localized areas.
  8. Surface treatment: surface washing and application of a layer of an impregnating agent.
  9. Final application of a polyurethane finishing coat.
  10. Subsequent polishing with white apropriate discs.               

CATALOGUE IMAGES

CATALOGUE